LIMITED WARRANTY
:
pIpER pRoDucTs warrants to the original purchaser parts and labor for a period of
twelve (12) months from the date of purchase. see manufacturer’s complete warranty for details.
It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level
by the occupational safety and Health Agency (osHA) and ANsI as a National Recognized Testing Laboratory. These
companies include csA International, underwriters Laboratories, and the National sanitation Foundation. However, a
continuing program of product improvement makes it necessary to submit new models to the agencies as they are
developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions do not entitle buyer to
corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not
for design purposes.
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
SPEC
300 s. 84th Avenue
Wausau, WI 54401
phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
R-2
Berkeley Series Hot Plates
Drop-In and Portable
CONSTRUCTION
A black Ceran Pyroceramic hot plate, with a mat-type heating element adhered to the underside, is set into
a rectangular base frame and rests on support angles fastened to the inside of the frame. The hot plate
is separated from the frame by a band of high temperature silicone. The frame is constructed of stainless
steel. The space beneath the heating element is filled with insulation and enclosed by a removable,
perforated stainless steel bottom access panel. All models are provided with an 8' long cord with matching
NEMA # plug as shown on specification chart. The temperature of the hot plate surface is adjustable to a
maximum of 250ºF.
Drop-in models:
Equipped with a 16 gauge stainless steel flange around the full perimeter of the frame to
support the unit when it is dropped into a counter cut-out.
Portable models:
The stainless steel frame is black enamel coated. The unit is equipped with a
surrounding protective handle constructed of all welded tubular stainless steel, attached to the base frame
with horizontal spacers. Series P16050 models are provided with non-arking bottom feet. Series P26050
models are provided with 2" diameter casters.
CONTROLS
All models are equipped with a toggle aster on/off switch and an infinite control with separate pilot light
(one for each section of the hot plate).
Drop-in models:
The controls are mounted in a stainless steel control box, mounted on the rear of the
base frame. The control box is easily removable, allowing for remote mounting. The controls are pre-wired
and furnished with 30" long connector cables.
Portable models:
Controls for the hot plate are mounted on the rear of the base frame.
SNEEZE GUARD WITH HEAT LAMP
Optional sneeze guard with heat lamp is available for all models. The quartz heat lamp(s) are mounted in
a channel shaped stainless steel housing which is mounted to tubular uprights. The housing is coated to
match the finish of the base frame and is enclosed with a stainless steel bottom plate with recesses into
which the quartz lamps are mounted. Up to four 375 watt quartz lamps are provided, based on length of
unit. One end of the housing is fitted with a blower to maintain safe temperatures.
An adjustable dimmer control is mounted to the housing. The intensity of the heat lamp can be adjusted
by the operator.
The curved sneeze guard is 1/4" thick acrylic. Sneeze guards are designed for self-service.
Drop-in-models:
Uprights are 1-1/2" diameter tubular stainless steel, welded to the perimeter flange, and
are fitted with a top cap.
Portable models:
Uprights are 1" diameter “U” shaped stainless steel, welded to the frame at each end.
HOT SPOT
Optional 1700 watt Hot Spot is available for all models. Maximum of one Hot Spot can be provided per
unit. The Hot Spot can provide up to a maximum of 800ºF, ideal for holding soup, boosting heat, wok
cooking and various other options.
343
