LIMITED WARRANTY:
pIpER pRoDucTs warrants to the original purchaser parts and
labor for a period of twelve (12) months from the date of purchase. see manufacturer’s complete
warranty for details.
It is our policy to build equipment which is design certified by companies that have been
accredited at the Federal Level by the occupational safety and Health Agency (osHA) and
ANsI as a National Recognized Testing Laboratory. These companies include csA International,
underwriters Laboratories, and the National sanitation Foundation. However, a continuing
program of product improvement makes it necessary to submit new models to the agencies as
they are developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions
do not entitle buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment. Information is not for design purposes.
SPEC
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
E-9B
SPECIFICATIONS
715 Series tray and silverware carts for silverware in
cylinders.
FRAME:
The frame is constructed of 1" O.D. 16 ga.
stainless steel tubing formed to support an overhead
silverware dispenser and to serve as push handles at both
ends.
SHELVES:
The shelves are formed of 18 ga. stainless
steel. All sides are turned down 1-1/4" and hemmed for
rigidity. All corners are fitted with adjustable brackets
to accommodate the uprights. The bottom shelf on
all models is set 8" above the floor, with 10" clearance
between shelves on 2 shelf models.
SILVERWARE DISPENSER:
The dispenser is constructed
of all welded 18 ga. stainless steel and is securely
fastened to the top of the tubular frame. The top is
canted and has round openings to accommodate plastic
or stainless steel silverware cylinders. (Cylinders not
included).
CASTERS:
The units are mounted on four 4" diameter
heavy duty, double ball bearing swivel casters.
Tray & Silverware Carts
MODEL 715-1-A8:
The unit has one bottom shelf and
openings for eight silverware cylinders.
MODEL 715-1-A10:
The unit has one bottom shelf and
openings for ten silverware cylinders.
MODEL 715-1-A12:
The unit has one bottom shelf and
openings for twelve silverware cylinders.
MODEL 715-1-A15:
The unit has one bottom shelf and
openings for fifteen silverware cylinders.
MODEL 715-2-A8:
The unit has two shelves and openings for
eight silverware cylinders.
MODEL 715-2-A10:
The unit has two shelves and openings
for ten silverware cylinders.
MODEL 715-2-A12:
The unit has two shelves and openings
for twelve silverware cylinders.
MODEL 715-2-A15:
The unit has two shelves and openings
for fifteen silverware cylinders.
OPTIONS
159-2701 - Silverware Cylinder, plastic (each)
R
R
011-3842 - Silverware Cylinder, stainless steel (each)
R
R
341-3483 - Napkin Dispenser, folded napkin 3-1/2" x 7"
R
R
Y4 - Polyurethane 4" casters, set of 4, with ball bearing
R
R
seals
Y5 - Polyurethane 5" casters, set of 4, with ball bearing
R
R
seals
R - Rotating bumpers
R
R
WB - Two locking casters
R
R
I (for carts) - Silverware, identity plates (knives, forks,
R
R
t-spoons)
CAPACITY: Up to 200 trays, 15-1/4" x 20-1/2" maximum size; 35-40 pieces of silver-
ware in each cylinder.
OVERALL DIMENSIONS: 36" long, 31 3/8" wide, 45" high.
NOTE: Add 3" to length and width for rotating bumpers.
Shown with optional silverware cylinders and rotating bumpers.
MODEL NO. SHIPPING
WEIGHT
MODEL NO.
SHIPPING WEIGHT
715-1-A8
60
715-2-A8
70
715-1-A10
60
715-2-A10
70
715-1-A12
60
715-2-A12
70
715-1-A15
70
715-2-A15
90
SILVERWARE IN CYLINDERS
MODEL NUMBER
715-1-A8
R
R
715-1-A10
R
R
715-1-A12
R
R
715-1-A15
R
R
715-2-A8
R
R
715-2-A10
R
R
715-2-A12
R
R
715-2-A15
R
R
MODEL 715-1-A8
MODEL 715-2-A12
129
