Piper Products F20-BI Brochure Download

Page: 12 / 33

LIMITED WARRANTY:

pIpER pRoDucTs warrants to the original purchaser parts and

labor for a period of twelve (12) months from the date of purchase. see manufacturer’s complete
warranty for details.

It is our policy to build equipment which is design certified by companies that have been

accredited at the Federal Level by the occupational safety and Health Agency (osHA) and

ANsI as a National Recognized Testing Laboratory. These companies include csA International,

underwriters Laboratories, and the National sanitation Foundation. However, a continuing

program of product improvement makes it necessary to submit new models to the agencies as

they are developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions

do not entitle buyer to corresponding changes, improvements, additions or replacements for

previously purchased equipment. Information is not for design purposes.

SPEC

D I S P E N S E R S

E L I T E 5 0 0

STEAM TABLES

SUPPORT EQUIPMENT

D R O P - I N S

JOB__________ ITEM # __________ QTY # __________

300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125

www.piperonline.net

E-10

130

SPECIFICATIONS

715 Series tray and silverware carts for silverware in pans.

FRAME:

The frame is constructed of 1" O.D. 16 ga. stainless steel tubing formed to support an overhead silverware dispenser

and to serve as push handles at both ends.

SHELVES:

The shelves are formed of 18 ga. stainless steel. All sides are turned down 1-1/4" for rigidity. All corners are fitted

with cast aluminum brackets to accommodate the uprights. The bottom shelf on all models is set 8" above the floor, with 10"

clearance between shelves on 2 shelf models.

SILVERWARE DISPENSER:

The dispenser is constructed of all welded 18 ga. stainless steel and is securely welded to

the top of the tubular frame. The tops are canted and are cut out to accommodate 6-3/8" x 10-3/8" x 4" deep stainless steel

silverware pans.On eight and ten pan capacity models, the silverware dispenser is two tiers high. The silverware pans are

furnished as standard.

CASTERS:

The units are mounted on four 4" diameter heavy duty, double ball bearing swivel casters.

MODEL 715-1-P4:

The unit has one bottom shelf and is supplied with four silverware pans on one level.

MODEL 715-1-P5:

The unit has one bottom shelf and is supplied with five silverware pans on one level.

MODEL 715-1-P8:

The unit has one bottom shelf and is supplied with eight silverware pans on two tiers.

MODEL 715-1-P10:

The unit has one bottom shelf and is supplied with ten silverware pans on two tiers.

MODEL 715-2-P4:

The unit has two shelves and is supplied with four silverware pans on one level.

MODEL 715-2-P5:

The unit has two shelves and is supplied with five silverware pans on one level.

MODEL 715-2-P8:

The unit has two shelves and is supplied with eight silverware pans on two tiers.

MODEL 715-2-P10:

The unit has two shelves and is supplied with ten silverware pans on two tiers.

OPTIONS

341-3483 - Napkin Dispenser, folded napkin 3-1/2" x 7"

Y4 - Polyurethane 4" casters, set of 4, with ball bearing

seals
Y5 - Polyurethane 5" casters, set of 4, with ball bearing

seals
R - Rotating bumpers

WB - Two locking casters

I (for carts) - Silverware, identity plates, stainless steel

(knives, forks, t-spoons)

CAPACITY: Up to 200 trays, 15-1/4" x 20-1/2" maximum size;

100 pieces of silverware in each pan.

OVERALL DIMENSIONS:
Model Nos. 715-1-P4, 715-1-P5, 715-2-P4, 715-2-P5: 36" long x 21 3/8" wide x 45" high.
Model Nos. 715-1-P8, 715-1-P10, 715-2-P8, 715-2-P10: 36" long x 21 3/8" wide x 55" high.
NOTE:

Add 3" to length and width for rotating bumpers.

MODEL NO.

SHIPPING

WEIGHT

MODEL NO.

SHIPPING

WEIGHT

715-1-P4

715-2-P4

715-1-P5

715-2-P5

100