LIMITED WARRANTY:
pIpER pRoDucTs warrants to the original purchaser parts and
labor for a period of twelve (12) months from the date of purchase. see manufacturer’s complete
warranty for details.
It is our policy to build equipment which is design certified by companies that have been
accredited at the Federal Level by the occupational safety and Health Agency (osHA) and
ANsI as a National Recognized Testing Laboratory. These companies include csA International,
underwriters Laboratories, and the National sanitation Foundation. However, a continuing
program of product improvement makes it necessary to submit new models to the agencies as
they are developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions
do not entitle buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment. Information is not for design purposes.
SPEC
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
E-12
132
W
L
50”
COMPACT CABINET STYLE, MOBILE
MODEL AT-ST-OSW8
CAPACITY-Approx. 100 to 150 trays
and 35-40 pieces of silverware in each
cylinder.
Dispenser shown with optional silverware
cylinders.
SPECIFICATIONS
Model AT-ST-OSW8 compact, cabinet style, mobile tray and
silverware dispenser.
FRAME AND BODY: The frame is constructed of all welded
heavy gauge stainless steel. The body sides are 20 ga.
stainless steel and top is 18 ga. stainless steel.
DISPENSER: The unit is fitted with a model ADIF adjustable
drop-in tray dispenser (see catalog page D-14 for specifications).
CASTERS: Unit is mounted on four 4" diameter heavy duty,
double ball bearing swivel casters with non-marking rubber
tires.
OPTIONAL ITEMS
One piece, wrap-around, non-marking vinyl bumper.
(Add 2" to length and width.)
12" vertical bumpers. (Add 1” to length and width.)
Side panels in laminated plastic in lieu of stainless steel.
2 rigid casters in lieu of swivel.
2 casters with brakes.
5" diameter casters. (Increases height 1”.)
Casters with polyurethane tires.
Nylon silverware cylinders.
Stainless steel cylinders.
Stainless steel silverware identity plates at each opening.
Add 1" to length and width for
vertical corner bumpers.
Add 2" to length and width for
wrap-around bumpers.
Shipping weight-135
HEIGHT 50''
- Other heights available.
CANTILEVER STYLE, MOBILE
ADJUSTABLE
MODEL ATCA-ST-OSW8
CAPACITY-Approx. 100 to 150 trays
and 35-40 pieces of silverware in
each cylinder.
Dispenser shown with optional silverware
cylinders and wrap-around bumper.
SPECIFICATIONS
Model ATCA-ST-OSW8 cantilever style, mobile tray and
silverware dispenser.
FRAME AND BODY:
The frame is constructed of all welded
heavy gauge stainless steel and mounted on a 12 ga.
stainless steel "Z" section base. The body is 20 ga. stainless
steel on all sides and top. The front panel is removable for
adjustment access. The top is fitted with a stainless steel
sloped overhead-type silverware dispenser, enclosed on all
four sides and provided with eight openings for insertion of
round silverware cylinders.
DISPENSING MECHANISM:
The tray carrier, constructed of all
welded 16 ga. stainless steel, is raised by a series of coil
springs attached to the frame. Ball bearing guides and a single
stainless steel aircraft type cable keep the carrier level in all
directions, even with an unbalanced load. The cable runs over
pre-lubricated plated steel pulleys.
ADJUSTMENT:
Adjustment for various tray weights is easily
accomplished by removing the front panel, then engaging or
disengaging individual springs as required.
CASTERS:
The unit is mounted on four 4" diameter, heavy
duty, double ball bearing casters with non-marking rubber
tires.
OPTIONAL ITEMS
One piece, wrap-around, non-marking, vinyl bumper.
(Add 2" to length and width).
2 rigid casters in lieu of swivel.
2 casters with brakes.
5" diameter casters in lieu of 4". (Increase height by 1")
Casters with polyurethane tires.
Nylon silverware cylinders.
Stainless steel silverware cylinders.
Stainless steel silverware identity plates at each opening.
Tray guides.
A
50”
B
HEIGHT 50"- Other heights available. Shipping weight-175
TRAY SIZE
W
L
10 x 14
18
28
12-1/4 x 16-1/2
18
28
14 x 18
22-1/2
28
15-1/4 x 20-1/2
22-1/2
28
17-1/2 x 21
22-1/2
28
22 x 16
22-1/2
28
TRAY SIZE
A
B
10 x 14
25
20
12-1/4 x 16-1/2
14
25-1/2
14 x 18
15
27
15-1/4 x 20-1/2
17
29-1/2
17-1/2 x 21
19
30
16 x 22
17
31
Tray & Silverware Dispensers
SPECIFICATIONS
Model ATCA-ST-OSW8 cantilever style, mobile tray and silverware
dispenser.
FRAME AND BODY:
The unit is constructed of all heavy gauge stainless steel and mounted
on a 12 ga. stainless steel. The body is 20 ga. stainless steel on all
sides and top. The front panel is removable for adjustment access.
The top is fitted with a stainless steel sloped overhead-type silverware
dispenser, enclosed on all four sides and provided with eight openings
for insertion of round silverware cylinders.
DISPENSING MECHANISM
The tray carrier, constructed of all welded 16 ga. stainless steel, is raised
by a series of coil springs attached to the frame. Ball bearing guides
and a single stainless steel aircraft type cable keep the carrier level in
all directions, even with an unbalanced load. The cable runs over pre-
lubricated plated steel pulleys.
ADJUSTMENT
Adjustment for various tray weights is easily accomplished by removing the
front panel, then engaging or disengaging individual springs as required.
CASTERS
The unit is mounted on four 4" diameter, heavy duty, double ball bearing
casters with non-marking rubber tires.
CANTILEVER STYLE,
MOBILE ADJUSTABLE
CAPACITY-Approx. 100 to
150 trays and 35-40 pieces of
silverware in each cylinder.
Dispenser shown with optional
silverware cylinders and wrap-
around bumper.
W
L
50”
COMPACT CABINET STYLE, MOBILE
MODEL AT-ST-OSW8
CAPACITY-Approx. 100 to 150 trays
and 35-40 pieces of silverware in each
cylinder.
Dispenser shown with optional silverware
cylinders.
SPECIFICATIONS
Model AT-ST-OSW8 compact, cabinet style, mobile tray and
silverware dispenser.
FRAME AND BODY: The frame is constructed of all welded
heavy gauge stainless steel. The body sides are 20 ga.
stainless steel and top is 18 ga. stainless steel.
DISPENSER: The unit is fitted with a model ADIF adjustable
drop-in tray dispenser (see catalog page D-14 for specifications).
CASTERS: Unit is mounted on four 4" diameter heavy duty,
double ball bearing swivel casters with non-marking rubber
tires.
OPTIONAL ITEMS
One piece, wrap-around, non-marking vinyl bumper.
(Add 2" to length and width.)
12" vertical bumpers. (Add 1” to length and width.)
Side panels in laminated plastic in lieu of stainless steel.
2 rigid casters in lieu of swivel.
2 casters with brakes.
5" diameter casters. (Increases height 1”.)
Casters with polyurethane tires.
Nylon silverware cylinders.
Stainless steel cylinders.
Stainless steel silverware identity plates at each opening.
Add 1" to length and width for
vertical corner bumpers.
Add 2" to length and width for
wrap-around bumpers.
Shipping weight-135
HEIGHT 50''
- Other heights available.
CANTILEVER STYLE, MOBILE
ADJUSTABLE
MODEL ATCA-ST-OSW8
CAPACITY-Approx. 100 to 150 trays
and 35-40 pieces of silverware in
each cylinder.
Dispenser shown with optional silverware
cylinders and wrap-around bumper.
SPECIFICATIONS
Model ATCA-ST-OSW8 cantilever style, mobile tray and
silverware dispenser.
FRAME AND BODY:
The frame is constructed of all welded
heavy gauge stainless steel and mounted on a 12 ga.
stainless steel "Z" section base. The body is 20 ga. stainless
steel on all sides and top. The front panel is removable for
adjustment access. The top is fitted with a stainless steel
sloped overhead-type silverware dispenser, enclosed on all
four sides and provided with eight openings for insertion of
round silverware cylinders.
DISPENSING MECHANISM:
The tray carrier, constructed of all
welded 16 ga. stainless steel, is raised by a series of coil
springs attached to the frame. Ball bearing guides and a single
stainless steel aircraft type cable keep the carrier level in all
directions, even with an unbalanced load. The cable runs over
pre-lubricated plated steel pulleys.
ADJUSTMENT:
Adjustment for various tray weights is easily
accomplished by removing the front panel, then engaging or
disengaging individual springs as required.
CASTERS:
The unit is mounted on four 4" diameter, heavy
duty, double ball bearing casters with non-marking rubber
tires.
OPTIONAL ITEMS
One piece, wrap-around, non-marking, vinyl bumper.
(Add 2" to length and width).
2 rigid casters in lieu of swivel.
2 casters with brakes.
5" diameter casters in lieu of 4". (Increase height by 1")
Casters with polyurethane tires.
Nylon silverware cylinders.
Stainless steel silverware cylinders.
Stainless steel silverware identity plates at each opening.
Tray guides.
A
50”
B
HEIGHT 50"- Other heights available. Shipping weight-175
TRAY SIZE
W
L
10 x 14
18
28
12-1/4 x 16-1/2
18
28
14 x 18
22-1/2
28
15-1/4 x 20-1/2
22-1/2
28
17-1/2 x 21
22-1/2
28
22 x 16
22-1/2
28
TRAY SIZE
A
B
10 x 14
25
20
12-1/4 x 16-1/2
14
25-1/2
14 x 18
15
27
15-1/4 x 20-1/2
17
29-1/2
17-1/2 x 21
19
30
16 x 22
17
31
Tray Size
A
B
10 x 14
25
20
12-1/4 x 16-1/2
14
25-1/2
14 x 18
15
27
15-1/4 x 20-1/2
17
29-1/2
17-1/2 x 21
19
30
16 x 22
17
31
HEIGHT 50'' - Other heights available.
Shipping weight-175
OPTIONS
WB - Two locking casters
R
R
PB - Perimeter bumper
R
R
Y4 - Polyurethane 4" casters, set of 4, with ball bearing
R
R
seals
Y5 - Polyurethane 5" casters, set of 4, with ball bearing
R
R
seals
159-2701 - Silverware Cylinder, plastic (each)
R
R
011-3842 - Silverware Cylinder, stainless steel (each)
R
R
341-3483 - Napkin Dispenser, folded napkin 3-1/2" x 7"
R
R
I (for carts) - Silverware, identity plates (knives, forks,
R
R
t-spoons)
ATCA-ST-OSW8
R
R
