D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
SPEC
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
E-19
140
CABINET STYLE, MOBILE, ADJUSTABLE
SERIES AT-ST (UNHEATED)
SERIES AT-STH (HEATED)
MODEL 3AT-STH
Dispenser shown with
optional wrap-around bumper
SPECIFICATIONS
Series AT-ST unheated and AT-STH heated, cabinet style, mobile dish dispensers.
CABINET: The body and top are of unibody design, constructed of heavy gauge stainless steel panels formed to provide rigidity.
Heated models (AT-STH) are insulated on sides and top and lined with zinc coated steel panels.
DISPENSERS: All units are fitted with model AT adjustable drop-in dish dispensers (see catalog page D-9 for specifications).
CAPACITIES: The capacity of each model AT dispenser is approximately 28 to 36 bowls or 50 to 72 plates.
HEATING SYSTEM: AT-STH models are fitted with a 120 or 208 volt (as specified) single phase, thermostatically controlled heating
system complete with a recessed control panel with on-off switch, neon pilot light and adjustable thermostat. The unit is
equipped with a 4' long, three wire cord set with NEMA 5-15P plug for 120V or NEMA 6-15P plug for 208 volt .
CASTERS: The cabinet is mounted on four 4" diameter heavy duty, double ball bearing swivel casters with non-marking rubber tires.
OPTIONAL ITEMS
One piece, wrap-around, non-marking vinyl bumper (add 2" to length and width)
12" long vertical bumpers (add 1" to length and width)
5" diameter heavy duty casters (increase height 1”)
Casters with polyurethane tires.
Mobile Dish Dispensers
SPECIFICATIONS
Series AT-ST unheated and AT-STH heated, cabinet style,
mobile dish dispensers.
cABINET:
The body and top are of unibody design, constructed
of heavy gauge stainless steel panels formed to provide
rigidity. Heated models (AT-STH) are insulated on sides and
top and lined with zinc coated steel panels.
DIspENsERs:
All units are fitted with model AT adjustable
drop-in dish dispensers (see catalog page D-9 for
specifications).
cApAcITIEs:
The capacity of each model AT dispenser is
approximately 28 to 36 bowls or 50 to 72 plates.
HEATING sYsTEM:
AT-STH models are fitted with a 120 or 208
volt (as specified) single phase, thermostatically controlled
heating system complete with a recessed control panel with
on-off switch, neon pilot light and adjustable thermostat. The
unit is equipped with a 4' long, three wire cord set with NEMA
5-15P plug for 120V or NEMA 6-15P plug for 208 volt.
cAsTERs:
The cabinet is mounted on four 4" diameter heavy
duty, double ball bearing swivel casters.
OPTIONS
WB - Two locking casters
R
R
PB - Perimeter Bumpoer
R
R
Y4 - Polyurethane 4" casters, set of 4, with ball bearing
R
R
seals
Y5 - Polyurethane 5" casters, set of 4, with ball bearing
R
R
seals
SSTC - Stainless Steel Tube Covers
R
R
CABINET STYLE, MOBILE, ADJUSTABLE
SERIES AT-ST (UNHEATED)
SERIES AT-STH (HEATED
MODEL 3AT-STH
Dispenser shown with
optional wrap-around bumper
2AT-ST
R
R
3AT-ST
R
R
4AT-ST
R
R
2AT-STH
R
R
3AT-STH
R
R
4AT-STH
R
R
