LIMITED WARRANTY:
pIpER pRoDucTs warrants to the original purchaser parts and
labor for a period of twelve (12) months from the date of purchase. see manufacturer’s complete
warranty for details.
It is our policy to build equipment which is design certified by companies that have been
accredited at the Federal Level by the occupational safety and Health Agency (osHA) and
ANsI as a National Recognized Testing Laboratory. These companies include csA International,
underwriters Laboratories, and the National sanitation Foundation. However, a continuing
program of product improvement makes it necessary to submit new models to the agencies as
they are developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions
do not entitle buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment. Information is not for design purposes.
SPEC
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
E-24
146
Drop-In Souffle & Cup Dispensers
BoDY:
Consists of a rectangular tubular housing with top flange
and removable bottom. The housing is constructed of 24 ga.
stainless steel and the top is 18 ga. stainless steel. Special
plastic retainers are provided to dispense the cups one at a
time.
DIspENsING MEcHANIsM:
The self-leveling assembly includes one
calibrated rust-inhibited coil spring connected to a stainless
steel platform for each tube. The entire assembly can be
removed from the body for cleaning.
DIMENSIONS
Model 2SCD: top flange 5"L x 7-1/2"W counter opening
4-3/16" x 6-5/8"
Model 4SCD: top flange 7-1/2"L x 7-1/2"W counter opening
6-5/8" x 6-5/8"
Overall height: 17"
NOTE: Sample souffle cup must be furnished.
Shipping weight:
Model 2SCD - 4
Model 4SCD - 7.5
The Piper model ATDC drop-in adjustable paper cup dispenser
is constructed of 304 series stainless steel for many years of
service, with trouble-free dispensing guaranteed by its no-jam
design. The quick release mounting bracket supports the
dispenser in vertical, angled or horizontal positions and allows
easy removal for cleaning.
BoDY:
The body consists of a 24 ga. stainless steel tube with
the top edge rolled for safety. Three specially formed stainless
steel leaftype retainer springs are mounted inside the tube at
the top. A bottom plate is inserted into the tube and retained
by two screws. The tube is inserted through a round hole in
the top plate until its rolled edge rests on the plate.
Top pLATE
: The round stainless steel top plate is flanged
down 1/2" around its perimeter to help keep dirt form being
wiped into the tube. Three stainless steel strips formed to
act as cams, and an adjustable locking clip, are welded to
the inside surface. A single screw is inserted into the clip
through a slot in the tube and serves to hold the body and
top plate together.
DIAMETER ADJusTMENT:
The retainer springs fit through slots
in the body and reach the underside of the top plate, where
they engage with the cams. With the screw loosened the
tube can be rotated with respect to the cams, forcing the retainer springs to
move either in or out. When the desired ID of the retainer springs is reached,
tightening the screw locks this setting so that proper single cup dispensing can
be achieved.
LoADING AND DIspENsING:
The dispensing mechanism consists of a stainless
steel coil spring which rests on the bottom plate and is capped with a plastic
cup. Two different springs are provided to give the proper dispensing pressure
for foam cups or for paper or plastic cups. Loading is accomplished by placing
a stack of cups into the top of the tube and pushing it down.
MouNTING AND cLEANING:
The provided mounting bracket mounts through the
counter. After the dispenser is fully inserted, a small counter-clockwise rotation
firmly locks it to the counter, A clockwise rotation unlocks the dispenser,
permitting it to be removed for cleaning. Removal of the bottom plate permits
easy disassembly of the entire unit for thorough cleaning.
DIMENsIoNs, cApAcITY AND AppRoVALs:
The maximum diameter is 7-3/8" and
the height under the counter is 24-1/2". The unit accepts cups with overall
diameters between 3" and 4-5/8". Capacity depends on the particular cup in
use.
NoTE:
Samples of the paper cups to be dispensed are NOT required. It
is, however, the customer's responsibility to ascertain that the cups are
within the acceptable diameter range indicated above. The cups must be of
normal light weight and made of either foam, plastic or paper.
CAPACITIES
Model 2SCD up to 250 souffle cups
Model 4SCD up to 500 souffle cups
(For paper or plastic souffle cups)
DROP-IN TYPE
DROP-IN TYPE - ADJUSTABLE
ATDC
R
R
2SCD
R
R
4SCD
R
R
