CHECK OFF COMPONENTS AND PARTS INCLUDED.
4
MAJOR COMPONENTS AND SUB-ASSEMBLIES
1 Fuselage with pre-installed vertical stab & rudder
2 Wing halves (left and right)
1 Horizontal stabilizer with pre-installed elevator .
1 Fiber glass cowl
1 Master bag of hardware
2 Fiberglass main landing gear
1 Documentation set including assembly and operations
manual
1 Set of trim sheets if required
CONTENTS OF MASTER BAG
2 Engine mount T-beams (aluminum) with allen screws
3 Ulatralight treaded wheels
1 Main landing gear parts bag
1 Landing gear covers bag
1 Wing parts bag
1 Spinner parts bag
1 Control horn parts bag
1 Nose landing gear
1 Miscellaneous parts bag
1 Spare parts bag
CONTENTS OF MAIN LANDING GEAR PARTS BAG
6 mounting screws
2 Axle assemblies with wheel collars
CONTENTS OF LANDING GEAR COVERS BAG
2 Landing gear covers
CONTENTS OF CONTROL HORN PARTS BAG
5 Metal bolts 3mm x 45-50mm
5 Metal nuts 3mm
5 Plastic control horns
5 Plastic T - nuts
5 Plastic beveled washers
CONTENTS OF WING PARTS BAG
1 Wood spar joiner
2 Wood alignment dowels guide
1 Wood wing dowel (thicker)
1 Small roil of wing joint tape
2 Aileron control rod assemblies with clevises
2 Flap control rod assemblies with clevises
2 Plastic wing mouting bolts
CONTENTS OF SPINNER PARTS BAG
1 spinner with allen screws
1 Allen wrench
1 Collet set
CONTENTS OF NOSE GEAR PARTS BAG
1 Pre-bent nose gear wire
1 Steering arm
2 Wheel collars
CONTENTS OF MISCELLANEOUS PARTS BAG
2 Wood guide blocks with slot for control rod support if
needed
1 Allen wrench for control rod EZ connectors
CONTENTS OF SPARE PARTS BAG
Assortment of extra spare parts that are not required but
may come in handy in service
ITEMS SHIPPED IN FUSELAGE
1 Fuel tank assembly with stopper, clunk and pre-bent
metal tubes
1 Universal servo tray with mounting screws and slider
plates
1 Power Module firewall with hardware. All control rod
assemblies.
