Piper PA-34-200T Seneca II Service Manual Download

Page: 132 / 869

PIPER SENECA II SERVICE MANUAL

TABLE III-I. INSPECTION REPORT

(cont.)

Inspection

NATURE OF INSPECTION

Interval (Hrs)

100

E. FUSELAGE AND EMPENNAGE GROUP

Remove inspection plates and panels ....................................................................

Inspect battery box and cables
Flush area as required and fill battery per Battery, Section II................................

Check fluid level in brake reservoir. (Fill as required.) ........................................

Inspect electronics installations for condition and security ...................................

Inspect antennas, mounts, and wiring for damage and security ............................

Inspect skins, bulkheads, frames, and stringers for damage, irregularities,
or structural defects (i.e. - skin cracks, distortion, dents, corrosion,
and loose or missing rivets)....................................................................................

For airplanes used for training, equipped with Prestolite pumps: Inspect
hydraulic pump motor brushes. (See Note 16.) .....................................................

Inspect aft wing attach fittings per paragraph 4-33a..............................................

Check hydraulic pump fluid level. (Fill as required.) ............................................

10. Inspect hydraulic lines for damage and leaks ........................................................

11. Check air conditioning system for refrigerant leaks ..............................................

12. Check refrigerant level in sight gauge of receiver-dehydrator. (Refer to

Section XIV.)..........................................................................................................

13. Inspect air conditioner condenser air scoop for condition and rigging..................

14. Inspect cabin heater. (See AD 2004-21-05.) ..........................................................

15. Check fuel lines, valves and gauges for damage and operation.............................

16. Check security of all lines......................................................................................

17. Inspect vertical fin for surface damage or irregularities (i.e. - skin cracks,

distortion, dents, corrosion, and excessive paint build up); structural defects
(i.e. - loose or missing rivets); misrigging or structural imbalance; hinge damage,
excessive wear, freedom of movement and proper lubrication; and attachment
points for missing or worn hardware. ....................................................................

18. Inspect vertical fin attachments for condition and security ...................................

19. Inspect rudder for surface damage or irregularities (i.e. - skin cracks,

20. Inspect rudder hinges, horn and attachments for damage and

operation ................................................................................................................

21. Inspect rudder tab hinge bolts for excess wear. (Replace as required.)

(See Note 14.) ........................................................................................................

22. Inspect rudder trim mechanism. (See Note 14.) ....................................................

23. Inspect stabilator and tab for surface damage or irregularities (i.e. - skin cracks,

distortion, dents, corrosion, and excessive paint build up); structural defects
(i.e. - loose or missing rivets); misrigging or structural imbalance; hinge
damage, excessive wear, freedom of movement and proper lubrication;
and attachment points for missing or worn hardware ............................................

Piper PA-34-200T Seneca II, Service Manual

Search results

Summary of Contents for PA-34-200T Seneca II

Reviews:

Related manuals for PA-34-200T Seneca II

Brands by name

Popular brands