ALPHA Trainer
www.pipistrel-aircraft.com
REV. 0
POH-162-00-40-050
5 Engine Data Display
The Engine Data Display is used for moni-
toring the engine operating parameters.
The only exception is fuel tank indicator
which indicates fuel tank status in per-
centage fuel remaining ranging from - 0%
(empty) up to 100% (full). Most indicators
have multicolored bars to show the pre-
ferred operating temperature. The red bar
defines the out of limit status and exceeds
the Rotax recommended limitations. The
engine data display shows most settings
with colored bars and digital numbers.
• Oil Pressure
• Oil temperature
• Water Temperature
• Manifold pressure
• CT
• EGT
• Fuel Pressure
• Instant fuel flow
• Fuel % remaining
• Battery voltage
• Outside air temperature
The Engine Data instrument displays the following readings:
6 RPM indicator
The RPM indicator is 57 mm (2¼”) unit
which displays the current engine revolu-
tions with both a familiar mechanical nee-
dle as well as a large OLED digital display.
Color arcs display the operating limitations
of the Rotax 912 UL engine.
|End |
Supplements
10-6
NOTE
The actual fuel consumption/flow and fuel quantity remaining are calculations based on
engine rpm and manifold pressure. These settings are to be used as a guide only and are NOT to
be relied upon for the safe operation of the aircraft. If in doubt confirm the fuel quantity remain-
ing before flight.
Summary of Contents for 890 AT 912 LSA
