background image

•   Ensure the official commissioning inspec�on has been carried out by the installer
•   Use only original parts provided by Piristeel Oy
•   Instruc�ons for the proper use of access ways can be found in separate product specific instruc�ons
•   Connect to the wire only with a glider cer�fied for Pisko SafeLine system
•   Pisko SafeLine wire system is to be used as a fall protec�on when moving along the appropriate path along the danger zones 

     of the roof. Leaning heavily on the wire while working on the roof might damage the system
•   Do not use the system if there is any visible damage
•   Access ways used for Pisko SafeLine installa�on must be executed according to Class 2 performance
•   SafeLine installed in a ladder can have only one person at a �me
•   Two persons are allowed to be a�ached on the Pisko SafeLine wire simultaneously on a walkway when there are at least two

     Pisko SafeLine wire holder brackets between the two persons
•   Connec�ng to the wire is only allowed between Pisko SafeLine wire holder brackets. Connec�ng is NOT allowed a�er the last 

     bracket, even if there is a loop formed by the wire
•   Pisko SafeLine wire system is not suitable for sports or recrea�onal ac�vi�es
•   Make sure that the harness matches the requirements provided in standard EN 361, and that the harness has not been 

     damaged. In addi�on, adjust the harness to the correct measurements before use of the system, and, if required also adjust the 

     harness during use
•   Use only proper safety ropes intended to be used as a Personal Protec�ve Equipment

To ensure the reliability and safety of the products, the property owner must carry out yearly inspec�on and maintenance 

procedures, by a professional authorized by the manufacturer.

Yearly Maintenance inspec�on checklist for Pisko Safeline wire system:

•   Check the �ghtness of joints, connec�ons and a�achments
•   Check that there are no damaged wire holder brackets, ladder fixing pieces or flat roof fixing pieces for wire holder
•   Check that the wire is undamaged
•   Check that the glider(s) is undamaged
•   Test the movement of glider stoppers for ladders and check that the parts of the stopper are not damaged
•   If the wire system is a�ached to a ladder or a walkway, inspect those parts according to their own maintenance instruc�ons
•   Replace any damaged or faulty parts immediately
•   Use only original parts provided by Piristeel oy when replacing damaged parts.
•   Addi�onal informa�on can be found on separate inspec�on form or Pisko Pro app

USE

MAINTENANCE

Version 1.1

11.03.2022

Piristeel Oy  

|

  Metallitie 4, 62200 Kauhava, Finland

Tel. +358 6 433 8800  

|

  www.piristeel.fi

Company

Commissioning inspection done by

Inspector

Date

CERTIFIERAD

C900083

Summary of Contents for Pisko SafeLine

Page 1: ... bracket 2 with M8 flange bolt and flange nut Avoid damaging the paint on the roof walkway during the fastening work Bend open the top plate of the bracket 2 enough for the wire to fit in Insert wire 5 in the bracket 2 When inser ng the wire inside the bracket 2 make sure the wire is completely inside the ring shaped elements of the bracket 2 Otherwise the teeth on the bracket 2 might not align corre...

Page 2: ...inals Excess tension should be avoided Extension of the wire is possible by u lizing ready factory assembled terminals Make the extension by twis ng the male terminal completely inside the female terminal The extension twis ng is easier while the wire coming as an extension is s ll as a roll 6 If the loose end of the wire a er the last bracket has not been equipped with any factory mounted termina...

Page 3: ... wire holder bracket on a walkway from other manufacturer use at least one le side hole and one right side hole on the ver cal part of the bracket Use 8 mm flange nuts and 8 mm flange bolts when a aching the bracket The hole in the walkway can be max M10 Otherwise follow the steps demonstrated previously in this instruc on Example of using the addi onal a achment holes on the SafeLine wire holder br...

Page 4: ...ents provided in standard EN 361 and that the harness has not been damaged In addi on adjust the harness to the correct measurements before use of the system and if required also adjust the harness during use Use only proper safety ropes intended to be used as a Personal Protec ve Equipment To ensure the reliability and safety of the products the property owner must carry out yearly inspec on and ...

Reviews: