No Diving or Jumping. Observe all Safety Rules
5-1
Section
5
POOL MAINTENANCE
MAINTAINING YOUR POOL
POOL MAINTENANCE
Keep your pool wall and frame clean. Always wash away any deposits of pool chemicals which land on the frame of
your pool. Wash periodically with a mild soap solution (no abrasives). At least once a year use a clear non-yellowing
household wax on all metal components.
Your pool and liner must be inspected regularly for leaks, corrosion, scratches, and punctures. If any problem is found
IMMEDIATE CORRECTIVE ACTION MUST BE TAKEN
. Small repairs and punctures in your liner may be easily repaired
using repair kits available at your local dealer. Scratches on your pool wall & frame must be touched up with anti-rust
enamel. Wire brush all rust and add a coat of enamel primer followed by a coat of color matching paint. Pool water is
full of various caustic chemicals, which will corrode metal parts. If any corrosion is allowed to continue, failure of the
pool structure may occur which could result in excessive property damage as well as bodily harm.
The skimmer & return area and below it are particular areas that must be carefully and regularly inspected. If
this area is wet, and remains wet for any length of time, it usually means there is a small leak. Skimmer/skimmer
return gaskets must be replaced when they become defective. Water must not be permitted to continually run
down the wall, if neglected pool will break. If proper skimmer/skimmer return gasket care is not maintained,
your warranty will be void!
Important Note:
Be sure to follow all local and state safety regulations when installing any accessory to your pool.
Any decks, and all entries, must be carefully monitored for safety and access to pool. Installing
any other manufacturer’s deck or slide is strictly forbidden!
