14
MANUAL LIGHTING PROCEDURE
1. Verify that the control knob is turned to the OFF position.
2. Connect LP gas cylinder as per instructions. Turn LP gas tank valve to OPEN.
3. Note the indicator marker on the control knob. Push in the regulator knob and turn
90 degrees (or 1/4) counter-clockwise to HIGH.
4. Quickly and carefully, use a lit match secured with the lighting rod (included with
the grill) to light burners. Access the burners through the cooking grid and hot
plate. Position lit match near side of burner Do not attempt to light another area
of the burner. This can cause injury.
NOTE: Do not use spirit, lighter-fluid or kerosene for lighting or
refreshing a fire in your griddle.
5. After the burner has caught fire, you are ready to enjoy your griddle at your desired
temperature!
SHUTTING OFF YOUR GRIDDLE
1. When finished cooking, turn LP gas tank valve to the CLOSED position, and allow
the regulator knob to pop out. This safety feature locks the regulator knob to
ensure that the gas is no longer flowing.
2. Turn control knob to the OFF position.
NOTE: A "poof" sound is normal as the last of the LP gas is burned.
3. Disconnect LP gas tank per Disconnect LP Gas Tank section.
WARNING: Allow the griddle to cool completely, and remove the
gas cylinder, before moving, travel, or for storage.
Summary of Contents for 10558
Page 23: ......