B-10
SV61027 Rev. D
Appendix B • DA700/DA750 Specifications
Material
Specifications
(continued)
Material Notes
Envelopes
have a flap along the long edge and are pro-
cessed by the printer non-flap edge first. Envelopes may
have either a diagonal or straight edge along the envelope
flap. Stuffing materials must be machine folded or cut sheets.
Booklets
are defined as media having physical dimensions
6 x 9” or larger. Booklets have an opening along their long
edge which is covered by a flap with an adhesive seal.
Catalog envelopes
have an opening along their short edge
which is closed by a flap with an adhesive seal.
Postcards
have no folds or bends. The printable side may
have a higher surface roughness than the non-printable side.
Self-mailers
may be of “C,” “Z,” or 1/2-folded construction.
They may not exceed the maximum allowable thickness as
specified on the previous page and must be tabbed per post-
al regulations. 1/2 and tri-folds must be machine produced.
Material Size and Thickness
Also see the table on page B-10
Width
Height
Thickness
Minimum
3” (76mm)
5” (127mm)
.003” (.0762mm)
Maximum
15.5” (394mm)
15” (381mm) .250” (6.35mm)
Summary of Contents for ADDRESSRIGHT DA700
