2-8
Setup
5. Connecting the Parallel Cable or USB Cable
Use the parallel cable to
connect the printer to a
standard parallel port on
your computer, or use a
USB cable to cnnect the
printer to a USB port on
your computer.
The Address Printer ports
are located on the rear of
the printer near the power
switch.
Parallel Cable
A. Align the male end of the parallel cable to the port on
the printer. Push the cable connector completely in.
B. Secure the cable in place. Use the two wire clips located
on each side of the Parallel connector to snap into the
tabs on the cable.
C.
Align the other end of the cable to the connector on
the computer and push into the port.
D. Secure the cable in place. Use the thumb screws on
the cable connector to screw into the connector on the
computer.
USB Cable
A. Align the squarer end of the USB cable to the USB port
on the printer. Push the cable connector completely in.
B. Align the flatter end of the USB cable to the USB port
on the computer or USB hub. Push the cable connector
completely in.
Assembling
the Printer
(continued)
USB port
Parallel
port
SV61183 Book.indb 2-8
SV61183 Book.indb 2-8
6/9/2004 9:16:44 AM
6/9/2004 9:16:44 AM
Summary of Contents for ADDRESSRIGHT DA950
