A-19
Printer Menus
2. Feeder
Signal
(continued)
D. On/Quick Off
This option turns on a signal whenver one or more
reocrds are in the buffer to be printed. The signal is
turned off once the sensor detets the piece to print the
last record of the buffer on.
E. Signal Polarity (Active On/Active Off)
This option reverses the signal used to trigger the feed-
er.
•
Active On
actives and external feeder by switching
on the feeder signal.
•
Active Off
activates an external feeder by switching
the feeder signal off.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
3. Lines
Per
Address
Use this option to set the number of lines of text in the
address field. It can be set from 1 to 66.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
4. Line
Termination
This item allows the printer to interpret what the Line
Termination (end of a line of text) is for different operat-
ing systems or software. Choose from the various Line
Termination formats to get the correct line count and
then the record will print correctly.
The typical software line termination is CR = CR;
LF = LF. If your software is not typical then the Line
Termination can be modified. The menu choic-
es are (CR=CR;LF=LF), (CR=CR+LF;LF=LF),
(CR=CR;LF=CR+LF), and (CR=CR+LF;LF=CR+LF).
Using the
Setup Menu
(continued)
SV61183 Book.indb A-19
SV61183 Book.indb A-19
6/9/2004 9:17:05 AM
6/9/2004 9:17:05 AM
Summary of Contents for ADDRESSRIGHT DA950
