5
●
System Settings
5-8
mailstation™ 2 Digital Postal Meter | SV61983 Rev. H
message displays.
6. When prompted to stay in setup, press
No
to return to main screen.
Selecting Tone/Pulse for Dialing Out to Data Center
via Analog Line
You can tell the machine if you use a tone or pulse type phone when
dialing out to the Data Center via an analog line.
1. Press
Menu.
2. Use the Review keys to scroll to "Change Setup" and press
Enter/
yes.
3. Use the Review keys to scroll to "Change communication settings?"
and press
Enter/yes.
4. Use the Review keys to scroll to "Change dial method?" and press
Enter/yes.
5. Use the Review keys to select tone or pulse and press
Enter/yes.
A
confirming message displays.
6. When prompted to stay in setup, press
No
to return to main screen.
Using Intra BMC ZIP Code Groups
Intra BMC (Bulk Mail Center) ZIP Code groups are a USPS pre-sort
option for bulk mailings in the USA. To qualify for a discount when using
Intra BMC ZIP Code groups:
• You must be sending mail pieces/parcels with origination and
destination locations within the same BMC service area, and
• You must create ZIP Code groups by entering the ZIP Code ranges
for the postal zones eligible for the discount. (Until the ranges are
entered, the Intra-BMC class will not be selectable on your system.)
NOTE:
It is not necessary to enter ZIP Code ranges to use the
Parcel Post "Local" BMC rate. When you enter 0 as the zone for
Pkg Service, Parcel Post, the Parcel Post "Local" BMC rate will be
selected.
For more information on your eligibility, contact a specialist at the Post
Office that handles your mail.
Creating/Maintaining Intra-BMC ZIP Groups
Before you can set up Intra-BMC (Bulk Mail Center) ZIP Code groups,
you must obtain a postal zone chart that is specific to your ZIP Code
from your local post office.
Use the postal zone chart to determine if the ending ZIP Code of the
parcel falls within your BMC Zone. If it does, the parcel is eligible for an
Intra-BMC parcel post rate.
