8
●
Ink Installation and Maintenance
mailstation
™
2 Digital Postal Meter
|
SV61983 Rev. H
8-5
Replacing the Print Head
IMPORTANT:
This procedure should only be done under the direction
or with the permission of a Pitney Bowes representative.
1. Press
Menu
.
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Install new print head?" and press
Enter/yes.
4. Open the top cover and locate print head.
5. Refer to the instructions that came with new print head to remove
the old print head and install the new one.
6. Press
Enter/yes
to confirm the replacement. A print head
initialization occurs which lasts about 2-3 minutes.
7. When prompted, insert an envelope/tape sheet to print a test pattern
to confirm print quality.
8. If test pattern looks good, press
Enter/yes
.
Replacing the Ink Tray
IMPORTANT:
This procedure should only be done under the direction or
with the permission of a Pitney Bowes representative.
1. Press
Menu
.
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Replace ink tray?" and press
Enter/yes.
4.
Refer to the instructions that came with new ink tray to remove the
old ink tray and install the new one.
5. Press
Enter/yes
when completed.