DF500 Folder Operator Guide
23
SV40214 Rev. A
SET NORMAL JOB?
YES: Enter
No:
!
Temporary Job
A Temporary Job is any folding job setup without it having been
stored in the machine’s memory. The settings are not retained by
the machine and cannot be recalled at a future date. A Tempo-
rary Job will be shown in the display by the word “TEMP” or the
letter “T”:
If you recall a programmed job and change any of its settings,
it will be regarded as a Temporary Job by the DF500 until it is
saved again to memory. See page 24 for details of saving a job in
memory or updating a job already in memory.
TEMP JOB: 1
READY
ØØØØØØ
T1 PAPER = 297.Ø
CHG: DONE: Enter
RUNNING A JOB
Normal Job
The Normal Job is a commonly used setup which can be recalled
very quickly when required. From the factory, this job is set to
give a letter (C) fold on 8-1/2" by 11" paper. However, it can be
set to a dif fer ent fold and paper com bi na tion, if required, by a
Pitney Bowes service engineer. Follow the steps below to select a
normal job.
1. Simply press the
Normal Job
key. The display will prompt:
2. Press
Enter
to activate the Normal Job settings or press
!
if
you have changed your mind.
3. During activation of the Normal Job, the display will show:
4. When the Normal Job is set, the display will only show:
READY
ØØØØØØ
SETTING
