SV62781 Rev. B
| Operator Guide
8 | SH2A Shredder
Troubleshooting
Material Jam
When too much material is being fed in the feed slot, the cutters jam, run in reverse for a short time
(material is released), and stop. The motor turns off and the material jam icon lights up.
To fix, remove the paper that has been fed back. The cutter starts running forwards automatically
and shreds the remaining paper. Continue shredding with less paper.
Motor Overload
If the motor becomes overloaded, the machine turns off and motor fault icon lights up. Wait about
25 to 40 minutes until the machine cools down before trying to restart.
Check List
If the machine isn’t working, check the following:
• Is the plug connected to the AC outlet?
• Is the power switch set to ON?
• Is the collection bin properly pushed in?
• Is there a material jam in the machine?
• Is there a motor overload condition?
If you can’t resolve the issue, please call for servicing.
