4
SitG Electricity User Guide ROI V1017
Battery Box
1. Use a black lead to connect the (+) terminal of the first battery
to the (-) terminal of the second battery.
Note:
The battery box
contains two 6-volt batteries. When the battery box is used with
the boards, it is necessary to connect the batteries to complete the
circuit.
2. Connect a red lead to the (+) terminal of one battery and a black
lead to the (-) terminal of the other battery (Figure 2). Connect
the other end of the leads to the corresponding terminals on the
board you wish to power.
+
-
Figure 2
