Page 5
For technical questions, please call 1-888-866-5797.
Long Ram Jack
Bleeding
IMPORTANT! Before first use, check for
proper hydraulic oil level in the Jack.
Then thoroughly test the Jack for
proper operation prior to its actual use.
If the Jack appears not to be working
properly, it may be necessary to bleed
its hydraulic system of excess air.
1. Remove the Oil Fill Plug.
2. Turn the Release Valve
counterclockwise.
3. Insert the Handle into the
Handle Socket.
4. Apply pressure to the lifting point, and
pump the Handle quickly several times.
5. Check the Oil Fill Hole and, if necessary,
top off the Oil Fill Hole with hydraulic oil.
6. Replace the Oil Fill Plug.
7. Test the Jack several times for proper
operation before attempting to lift a load.
If, after purging, the Jack still
does
not
appear to be working
properly, do not use the Jack
until it has been repaired by a
qualified service technician.
Oil Fill
Plug
Oil Fill
Hole
Handle
Release
Valve
