MixMult Module
!
!
Description
The MixMult is a multi-function module. The top section is a flexible, low-noise three channel mixer and/or attenuator for audio and CV
that can be used in several ways. The bottom section contains 2 sets of passive multiples.
!
Two of the three mixer channels have an output that removes the channel from the mixer circuit and allows it to become a standalone
attenuator. The pots are wired with a logarithmic volume curve that is tuned for use with audio but it will work with CV as well.
!
Patching the output of channel 1 or 2 will remove it from the mixer circuit. Channel 3 cannot be removed from the mixer circuit, however
if channel 1 and 2 are all being used as attenuators, channel 3 is the only input remaining in the mixer allowing it to be used as a
buffered attenuator.
!
The mixer section can be used as a…
3 Channel Mixer
2 Channel Mixer and 1 Attenuator
3 Independent Attenuators
!
The bottom of the module contains two sets of passive multiples. Patching a signal into one of the multiple jacks will split the signal to
the remaining two jacks, allowing a single audio or CV signal to be used in two places at once.
!
!
!
!
13