Page 4
For technical questions, please call 1-888-866-5797.
Item 64908
Setup and Operation
Attaching the Handle
1. Insert the Handle into the Handle Socket.
2. Turn Handle clockwise until Handle base
is securely threaded into Socket.
Bleeding
1. Loosen the Oil Fill Screw.
2. Insert the Handle into the Release Valve.
3. Turn the Handle counterclockwise to open valve.
4. Insert the Handle into the Handle Socket. Pump
the Handle up and down quickly for several
times to purge the air from the system.
5. Tighten the Oil Fill Screw.
Adding Oil
1. Remove the Oil Fill Screw.
2. Add qualified hydraulic oil of high grade
into the Fill Screw opening slowly until the
oil reaches the top of the oil fill hole.
Note:
Do not touch Handle when adding the hydraulic oil.
3. Replace the Fill Screw.
