40
/48
Installation, use and maintenance
M0583
14.3 DISPENSING VIA USER KEY (I-BUTTON)
When the manager creates the driver he can add an electronic key (iBut-
ton) which is used to perform the access.
To do this, just add the last 7 digits of the hexadecimal code associated
with the key to the input of the driver's card in WebAPP (see WebApp
manual, chapter "ADD NEW DRIVER").
The i-Button serves as a means of authentication to replace the smartphone.
For the dispensing, simply place the iButton on the reader in the controller:
authentication takes place, then you can start dispensing.
Dispensings are uploaded to the cloud as soon as a smartphone with an
active data connection connects to the controller.
ATTENTION
The delivery via the iButton key is allowed only when the procedures indicated
in paragraphs 13.2, 13.3 and 14.1 have been successfully completed, through the
use of a smartphone and the WebApp.
These procedures are essential, as they allow the operator to configure the sy-
stem and manage the control units inside it, and in the same way they ENABLE
THE AUTHORIST TO DISPENSE ON A SPECIFIC CONTROL UNIT.
NOTE
Dispensing via iButton is recommended only in cases of extreme necessity
related to the lack of possibility to dispense with smartphones.
This is because a delivery with iButton does not allow you to update the
cloud directly, thus jeopardizing the real potential of the system.
