M0313 it | en
42
/60
Installation, use and maintenance
ELECTRIC
SHOCK
Electrocution
or death
F
This equipment must be grounded. Improper grounding, setup or usage of the
system can cause electric shock.
Turn off and disconnect power cord before servicing equipment.
Connect only to a grounded electrical outlets.
Use only 3 wire extension cords in accordance with local electrical codes. Ex-
tension cords should have a ground lead.
Ensure ground prongs are intact on power and extension cords.
Do not expose to rain. Store indoors.
Never touch the electric plug of socket with wet hands.
Do not turn the dispensing system on if the power connection cord or other
important parts of the apparatus are damaged, such as the inlet outlet plumb-
ing, dispensing nozzle or safety devices. Replace damaged components be-
fore operation.
Before each use check that the power connection cord and power plug are
not damaged. If damaged, have power connection cord replaced before use
by a qualified electrician.
The electrical connection between the plug and socket must be kept well
away from water.
Unsuitable extension leads can be hazardous, in accordance with current regu-
lations. only extension cords that are labelled for outdoor use and have a suf-
ficient conduction path should be used outdoors.
For safety reasons, we recommend that, in principle, the equipment be used only
with a earth-leakage circuit breaker (max 30 mA).
Electrical connections must use ground fault circuit interrupter (GFCI).
Installation operations are carried out with the box open and accessible elec-
trical contacts. All these operations have to be done with the unit isolated from
the power supply to prevent electrical shock!
Summary of Contents for V100
Page 2: ...M0313 it en 2 60 Installazione uso e manutenzione Bulletin M0313 it en ITALIANO ...
Page 32: ...NOTE ...
Page 62: ......
Page 63: ...NOTES ...
