www.pivotcycles.com
6
3
1
4
2
USB Port
LED Hub
The Ring Control is a multi-function switch located just inside
of the left grip on the handlebars.
This switch is used to turn the bike on and off.
• The switch is used to select between the different assist modes.
• Holding the switch up can activate Boost Mode.
• Holding the switch to the right accesses Walk Assist.
• The switch can also control lights if connected to the system.
FAZUA BASICS
Control Element Details
NOTE: FAZUA offers multiple controller options. The Shuttle SL is equipped with the "Ring Control" and the
"LED Hub". This manual specifically addresses the function of these elements. Additional information
regarding the other remote options offered by FAZUA can be found on their website.
Charging the Battery
NOTE: The battery does not come fully charged and must be completely charged before the first use.
1. Prepare the charger by plugging the power cable into the power inverter.
2. Connect the charger to an outlet.
3. Open the magnetic cover over the bikes charging port found on the non-drive side of the seat tube.
4. Plug the power cable into the bikes charging port.
During the charging process, the LED indicator on the charger lights up red to indicate that the battery is
charging. When the color of the LED indicator switches to green, this indicates that the battery is fully charged.
Ring Control
The LED Hub is located in the center of the top tube and provides
system information to the rider.
The five LEDs indicate:
• Battery level
• Assist mode
• Bluetooth connectivity
If only the top LED is illuminated or flashing it indicates
system information.
*See page 14 for system information and
troubleshooting.
The LED Hub houses a USB port for connecting to a PC or to
plug in other accessories.
BIKE ON/BOOST
BIKE OFF
WALK
ASSIST
NOTE:
press & hold
for >2 seconds
ASSIST MODE +
ASSIST MODE -
short press
