PIVOT cycles SHUTTLE, Original Operational Instructions

www.pivotcycles.com

info@pivotcycles.com

1.877.857.4868

6

CHARGING

Charging the Battery

•  The battery for the Shuttle can be charged while installed, but can also be charged after removing the 

battery from the frame.

•  In order to charge the battery off the bike, you will need the charging adapter (PN 5J.E4C0C.020) which can 

be ordered through Pivot Cycles.

Charging the Battery on the Bike

1.  Locate the rubber cable port on the driveside of the downtube near the headtube 

(fig 1)

.

2.  The charging port is underneath the rubber cable managment clamp and can 

be accessed through the sealing cover. Pull back the sealing cover to expose the 

charging terminal.

3.  Look for the alignment pin in the charger and insert the charging cable into the 

charging terminal, ensuring the cable and terminal are properly aligned.

4.  Secure the cable to the terminal by threading the charging cable collar onto the 

terminal threads 

(fig 2).

5.  The display will illuminate briefly when the charger is properly connected. The 

charger LED lamp will glow red while charging, and glow green when charging is 

complete.

6.  When done charging, unthread the cable from the terminal and close the sealing 

cover on the rubber cable management cap.

Charging the Battery off the Bike

1.  Remove the battery from the bike. Instructions for this procedure can be found on page 9 in this 

document.

2.  Look for the alignment pin in the charger and insert the charging cable into the charging adapter, 

ensuring the cable and adapter are properly aligned.

3.  Secure the cable to the adapter by threading the charging cable collar onto the adapter threads.

4.  Orient the adapter terminals with the terminal block on the battery and plug the adapter into the 

battery.

5.  The charger LED lamp will glow red while charging, and glow green when charging is complete. The 

current charge level will be displayed on the battery LEDs just above the terminal block on the battery.

6.  When done charging, remove the adapter from the battery terminal block.

Charger LED Lamp

•  After charging has started, the LED lamp on the charger lights up.

LED INDICATOR

DESCRIPTION

Lit Up (GREEN)

Battery Charging Complete

Lit Up (RED)

Battery Charging

Charger LED Lamp

1

2

Battery

Adapter  (5J.E4C0C.020 - Sold Separately)

Charger