721-0026-000_D-en.docx
April 2016
3
Corporate Sync
If supported in your facility, your PIVOT supports over-the-air
synchronization with corporate contacts, email and calendars.
Contact your system administrator for details on how to set this
up on your device.
Barcode Reader
(8753 only)
The barcode reader is activated by an application that utilizes the
scanned barcode as data. Both 1D and 2D types of barcodes can
be scanned.
Open the application that requires a barcode scan and hold the
device in a horizontal position and press the scan button. The
data is entered in the text field.
PIVOT is ergonomically designed so that you can hold the device
in a horizontal position when scanning. The LED slants down,
preventing wrist strain.
Applications in Webview
Applications that have been specifically developed for your facility
are opened by tapping a shortcut widget in the Application box.
Push-to-Talk
If activated in your facility, the PTT feature allows your PIVOT to
operate in a group broadcast mode, where a single handset can
transmit to multiple listeners, like a two-way radio.
Battery Pack
The Battery Pack can be removed and charged in the Quad
Charger which is especially designed for shift use. The battery
itself clips into a carrier and does not need to be removed from
the carrier before charging it in the Quad Charger.
Always start every shift with a fully charged battery.
Removal:
(8741, 8753) Slide the carrier latch towards the phone
body to remove the Battery Pack.
Replacement:
(8741, 8753) To replace the Battery Pack, slip the
tabs at the top of the carrier into the corresponding slots at the
top of the battery cavity. Gently press the bottom of the Battery
Pack until it snaps into place. The Battery Pack should snap into
position with minimal pressure.