PIXAPRO
®
Standard Non-Recessed Softbox Instruction Manual
For SKU Codes: D-010200-01, D-010200-02, D-010200-03, D-010200-04, D-010200-05, D-010300-01, D-010300-02, D-
010300-03, D-010300-04, D-010300-05
Manual instructions:
Notes:
1.
Find a large open area and spread the Softbox Shell on the floor, silver side up and place
the Speedring into the centre, with the narrow end facing down. Study the pockets at the
corners and locate the Velcro pockets.
2.
Study the different holes of the Speedring. Insert the large tip of the Rods in the holes that
correspond to your softbox model as shown in Figure.
3.
Place Speedring (with rods still inserted) in the centre of the Softbox shell.
(It does take a little strength to initially erect, as the rods are powerfully sprung. Care should be taken
and we advise that protective eyewear should be worn.)
