PIXAPRO
®
Standard Non-Recessed Softbox Instruction Manual
For SKU Codes: D-010200-01, D-010200-02, D-010200-03, D-010200-04, D-010200-05, D-010300-01, D-010300-02, D-
010300-03, D-010300-04, D-010300-05
Attachment of inner diffuser and outer diffuser
4.
Locate the 4 elastic bands inside the Softbox at mid-perimeter on each corner. Locate 8
elastic bands if your model is an Octagon Softbox. Connect all 4 corners of the Inner
Diffuser to the 4 elastic bands. Connect 8 corners of the Inner Diffuser to the 8 elastic
bands if your model is an Octagon Softbox
WARNING: DO NOT
insert the rods underneath the pockets, be sure to insert them inside the
pockets,
NOT under
.
5.
Finally take the External light diffuser and stretch over the four corners. Use the Velcro
edges down the sides to secure the diffuser in place.
6.
Flip the softbox over and secure the Velcro flaps together around the Speedring Insert. For
Octagon Boxes, secure the back cover to Velcro around the Softbox Shell. Make sure it
covers the Speedring Insert.
PIXAPRO
®
Standard Non-Recessed Softbox Instruction Manual
50 Popes Lane
Oldbury
B69 4PA
Tel: 0121 – 552 3113
Email: pixaprouk@gmail.com
