3
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
• To ensure maximum performance, please read this manual carefully. Keep it in a safe place for future reference
• Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust,
moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not
expose the unit to rain or water
• Never remove the unit cover. Contact your dealer if an object falls inside the unit
• Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug
and the wires connected to other equipment. Never pull on the wires themselves
• The openings on the unit cover assure proper ventilation of the unit. If these openings are obstructed, the
temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install
the unit in a well-ventilated area to prevent fire and damage
• Be sure to allow a space of at least 30 cm behind, 20 cm on both sides and 10 cm above the top panel of the
unit to prevent fire and damage
• Digital signals generated by this unit may interfere with other equipment such as tuners, receivers or TVs.
Move this unit further away from such equipment if interference is observed
• Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth
• Be sure to read
Section
8
: Troubleshooting regarding common operating errors before concluding that the
unit is faulty
• When not planning to use this unit for long periods of time, disconnect the AC power plug from the wall outlet
• To prevent lightning damage, disconnect the AC power plug when there is an electrical storm
• Grounding or polarization - Precautions should be taken so that the grounding or polarization of an appliance
is not defeated
• This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this
unit itself is turned off. This state is called the standby mode. In this mode, this unit is designed to consume a
small amount of power
PRODUCT COMPLIANCE
Crystalio II
has undergone compliance testing in order to ensure that it meets rigorous standards for electrical safety
and electromagnetic emissions. Certification marks can be found on a label attached to the underside of every
Crystalio II
unit.
The following diagram shows where the label can be found.
