57
7.3.1 USER DEFINED GAMMA CURVE
When
User
is selected as the
Gamma Type
and the
action button is pressed,
the OSD turns to the following page:
Use the
Left/Right
remote control keys to select one of the 20
Input IRE Adjustment Points
(refer to the graph above).
Once selected, press the
OK
remote control key. The OSD turns to the following page:
Use the
Left/Right
remote control keys to adjust the
Output Luminance
at that IRE value.
To return to the
User IRE
slider press the
Back
remote control key.
•
User IRE
slider has values from 7.5 (black) to 100 at 5 IRE intervals from 10-100
(refer to the graph on the previous page)
•
Gamma Value
slider has values from 16 to 235
• When the
OK
remote control key is pressed whilst adjusting the gamma value, the OSD
is hidden and only the slider control is shown at the lower left corner of the display
• Press the
Back
remote control key to return to this page, or simply press the
Menu
key
to exit from OSD mode
7.3.2 R/G/B INDIVIDUAL GAMMA CURVE
Crystalio II
allows independent adjustment of R, G and B channels. See
section
4.6.3
for calibration information.
Gamma type for R, G, and B channels can be defined independently
When the
action button is pressed, the OSD turns to the following page:
