Welcome to the
Crystalio II Media Player
supplementary guide. This guide is to be used in addition to the
main
Crystalio II
Owner’s Guide. Please refer to that guide for the information needed to get
Crystalio II
connected and working in your home theater system.
The Pixel Magic
Crystalio II Media Player
will deliver the finest standard and high definition images direct to
your display without the need for external sources. By directly integrating the HD media player into the
video processor, viewers will benefit from the cleanest signal path available and enjoy features such as
automatic resolution and aspect ratio detection, DVD file navigation and high fidelity audio output.
Please find below a list of the items needed to use the
Media Player
aspect of
Crystalio II
and also a list of
items you may find enhance the experience:
If any part of your system is missing or appears damaged, contact your dealer immediately.
This guide contains instructions for
Crystalio II
firmware version 1.30. As the firmware is updated, this guide
will be replaced to reflect any changes.
Once again, thank you for purchasing
Crystalio II
, the World’s most advanced video processor!
Enjoy!
In order to use all the features of your
Crystalio II Media Player
, you may wish to have access to
one or more of the following:
1. A PC with an FTP application installed to access the
Crystalio II
internal Hard Disk Drive
(see
section 4.1
)
2. USB 2.0 storage device/s to connect to the USB ports on the back of
Crystalio II
(see
section 4.2
)
3. A PC or Network Attached Storage (NAS) device supporting the NFS protocol for file streaming
(see
section 4.3
)
In order to operate the
Crystalio II Media Player
you will need the following:
1.
Crystalio II
VPS3800 model already connected and configured for your display device
(see main
Crystalio II
Owner’s Guide)
2.
Crystalio II Media Player
remote control with 2 AAA batteries
3. This
Crystalio II Media Player
supplementary guide
WELCOME
