31
4.3.2
Connecting External USB Devices
HD MediaBox supports the use of USB 1.0 and USB 2.0 Mass Storage Devices. This term can refer to thumbdiscs,
external HDDs with a USB interface and other devices that are seen by HD MediaBox as file storage.
HD MediaBox streams the media across the USB interface, therefore the increased bandwidth of USB 2.0 is
recommended.
USB devices can be connected to, and disconnected from HD MediaBox at any time. However, if a device is
removed while HD MediaBox is accessing the drive for playback, HD MediaBox will stop the file and return to
File Browsing Mode.
Up to 2 USB devices can be connected to HD MediaBox.
4.3.3
Network Streaming
HD MediaBox can be used to enjoy your existing collection of videos, photos and music by accessing shared files,
folders and drives over your Local Area Network (LAN).*
HD MediaBox uses the SMB protocol (Server Message Block - commonly used by Microsoft Windows) to stream
files across the network and this is also supported by many NAS (Networked Attached Storage) drives.
A 10/100 Ethernet port (a 100BASE-T network is recommended) is included on the back of the unit, and HD
MediaBox will automatically configure itself via the DHCP protocol (see
section 5.4.5
). Simply connect a network
cable between HD MediaBox and your router before turning on HD MediaBox.
You cannot use the LAN to access the files stored on an HD MediaBox internal HDD - the USB
connection is provided for this function (see
section 4.3.1
).
* Some high bitrate High Definition video files may not play smoothly across the network.
USB
thumbdisk
External USB Hard
Disk Drive
network cables not included