14
In rare situations, the Auto Configure routine will be unable to match perfectly, the
displayed image with the input signal. Usually this is due to non-standard video timing or
an image with a black or mostly-black background. Use the options of the Settings menu
to manually fine tune the displayed image.
In addition to the hot-key shortcut described earlier, auto-configure can be performed
manually by selecting Auto Configure from the Setup menu, and pressing the RIGHT
OSD menu button to activate.
Horizontal Position, Vertical Position, Clock and Phase can be set manually, by pressing
the UP or DOWN buttons to select an option and then pressing the LEFT or RIGHT
buttons to adjust that option. Horizontal and Vertical position adjust the location of the
displayed image, while Clock adjusts the width horizontally. Phase will minimize any
vertical bands of noise (distortion) that might be visible in non-standard video modes.
Users Guide (MAN-00013) Rev.C
3/6/08
