3
Installation and Set Up
The display will fit industry standard 19” rack mount systems, with an available 9U
(15.75”) vertical opening.
Attach to the racking system with the four (4) 1/4x20 screws provided, or use equivalent
screws to secure the display.
Attach power and video cables as needed, and ensure cables are not pinched or pulled
tight by other devices mounted below the display.
Ensure that the air space behind the display is adequately ventilated.
Reference
Read the reference section completely, before attempting to use this display device.
On Screen Display (OSD) Controls
All adjustments to this display device are made via the 8 buttons centrally located on the
front of the display.
POWER
Briefly pressing and releasing the POWER button will turn the display on
or off.
MENU
Pressing the MENU button will activate the on screen menu system. When
a menu is displayed, pressing MENU will remove the on screen display
(OSD) and save changes.
SELECT
Press SELECT to select a sub menu or to activate the Auto Adjust
*
when
no menu is displayed.
Users Guide (MAN-00013) Rev.C
3/6/08
