4
DOWN
When a menu item has more than one option, pressing DOWN selects the
next available option within the currently displayed menu
UP
When a menu item has more than one option, pressing UP selects the
next available option within the currently displayed menu
RIGHT
Pressing the RIGHT key will adjust the value of a selected menu item to
the next higher setting. Holding the RIGHT key down will rapidly increment
the selected item.
LEFT
Pressing the LEFT key will adjust the value of a selected menu item to the
next lower setting. Holding the LEFT key down will rapidly decrement the
selected item.
INPUT
Pressing the INPUT key will change the displayed image to the next input
source. Select between RGB, DVI, VIDEO and S-VIDEO. If no video
signal is detected, a message will be displayed.
LED
The LED will provide status information under the following conditions:
Green: Normal operation. A valid video mode has been detected and is
being displayed from the currently selected video source.
Red: Off mode. No valid video signal can be detected from the currently
selected video source.
Amber: DPMS mode. A power saving mode, triggered by a signal from the
video source device.
Auto Set Up
* Auto adjust is activated when no OSD menu is displayed and the SELECT button is
pressed.
Users Guide (MAN-00013) Rev.C
3/6/08
