1. Product Introduction
The PIXIE Ambience Touch Panel is a premium addition to the PIXIE
solution that elevates the smart home experience.
The PIXIE Touch Panel is configured after the PIXIE smart home has
been configured using the PIXIE App and is ideally used as a central
control hub for the home.
1.1 Product Features
• Control PIXIE devices installed throughout the home in a
centralised location.
• Matches the PIXIE Ambience faceplate range aesthetic
• 5.5 inch high-resolution wide-angle colour touch screen
• Four multifunction buttons for rapid access to commonly used
devices, groups and scenes
• RJ45 port for stable LAN connection and optimal operation
• Wi-Fi connection supported for situations where LAN cabling is
infeasible
• Supports Power over Ethernet (PoE), or 12V DC power input if POE is
not available. (Power supply purchased separately)
• Auto-adjustable display brightness
1.2 Pre-requisitions before setup
•
Power:
12 V DC or PoE
•
Network:
LAN cable (recommended) or Wi-Fi
•
PIXIE PLUS App:
- Ensure the PIXIE Plus App is up-to-date before installing
the PIXIE Ambience Touch panel.
- The mobile phone operating the PIXIE Plus App is on the
same network as the PIXIE Ambience Touch Panel.
•
PIXIE Gateway:
- At least one PIXIE gateway is deployed, PIXIE Gateway
G3 (model NO. SGW3/BTAM) is highly recommended for
optimal performance.
- The PIXIE Gateway is on the same network as the PIXIE
Ambience Touch Panel.
Note
Though being compatible with PIXIE Gateway G1 (model NO.
SGW/BT) and PIXIE Gateway G3 (model NO. SGW3/BTAM), it’s highly
recommended to use the Touch Panel with PIXIE Gateway G3
(model NO. SGW3/BTAM) for optimal performance.
Please refer to the feature matrix below comparing the performance
of the PIXIE Ambience Touch Panel with PIXIE Gateway G1 and PIXIE
Gateway G3.
PIXIE Gateway G1
How many PIXIE Ambience Touch Panels can
work properly under the PIXIE PLUS account?
Updating of control data after changes
made in PIXIE Plus App and network
Connection stability
Fair, subject to Wi-Fi coverage and
router status
Ideal, due to LAN cable connection
1
Requires manual operation to
re-sync the data
Network formed with
PIXIE Gateway G3
Network formed with
Automatically re-syncs the data
8
Installation Instructions
STP54BTAS
AMBIENCE
Touch Panel
Devices must be installed by a
qualified electrician in accordance
with all national and local electrical
and construction codes and
regulations.
Do not connect inputs to mains.
The PIXIE Ambience Touch Panel is
compatible with the PIXIE Plus App
only and requires a PIXIE Gateway
to operate.
1.3 What’s included in the package
Pan head Screws * 2
Touch Panel * 1
Mounting Template * 1
Mounting Bracket * 1
Countersunk screw * 5
Expansion bolt * 5
Pin Key * 1
Mounting Template
UP
UP
