ASSEMBLY INSTRUCTIONS
PAGE
2
GO STAND ASSEMBLY STEPS:
Unpack box and lay out all parts.
1.
Connect 1 bottom tube section into left tube section hole. Press allen screw up
through the mated bottom hole and hold in place with finger. Then place rivet
nut down through top hole to align with allen screw and hand tighten. Use allen
wrench to tighten completely. Connect 2nd bottom tube section into other left
tube hole and fasten using same process as above. Connect bottom tubes into
right tube section holes and fasten using same process.
STEP
1
2)
Place grill bottom capsule on
PK-GO™ stand oriented as shown.
Hinge side of capsule should be
placed on left tube section.
3)
Place charcoal grate and hinged
cooking grid inside grill bottom capsule.
Hinged Side
Hinged Side
H
ex screws
