~
83
~
Proper positioning of the trays is mandatory for safe
operation of the appliance. Otherwise, hot food or
cookware can slide off the trays when removing them.
4.3.1 General operation of the oven
❖
The oven can be warmed up using the bottom and top heaters.
❖
The operation of the oven is controlled by the
ROTARY KNOB FOR THE SELECTION
OF THE OVEN FUNCTIONS
(
F
/ s. chapter 3.2 C
ONTROL PANEL
). Three different
oven functions are selectable (+ internal light / s. chapter 4.4 O
VEN
FUNCTIONS
).
To set a function you should turn the knob to the desired position.
❖
To select a temperature, use the
ROTARY KNOB FOR THE SELECTION OF THE OVEN
TEMPERATURE
(
E
/ s. chapter 3.2 C
ONTROL PANEL
) to set the desired
temperature. You can select a temperature between of 50 °C and 250 °C (
turn
in
clockwise direction only
).
❖
To switch off the oven completely, you must turn the rotary knob for the
selection of the oven functions to position «
» and the rotary knob for the
selection of the oven temperature to position «
0
» (s. fig. below).
To switch on the oven, you must set an oven function
and
an oven temperature
too. If you only select an oven function, the oven does not switch on.
R
OTARY KNOB
:
OVEN FUNCTIONS
R
OTARY KNOB
:
OVEN TEMPERATURES
NOTICE!
Turn the rotary knob for the selection of the oven temperature in
clockwise direction only
. After you have set a temperature, you can turn
the knob back to its home position. Otherwise, you may damage the rotary
knob.
