49
I
NSTALLATION OF THE HOB
:
1.
Before installing the hob to the worktop, the adhesive seal has to be fixed on the
bottom
edge of the hob properly.
The seal has to be fixed properly. The outer side of the seal must match the
bottom outer edge of the hob (s. fig. below). The seal
must be
fitted tightly on
the bottom edge of the hob (no overlaps, no gaps etc.) to prevent liquids etc.
from entering the installation opening subsequently.
1
Seal
2
Hob
3
Worktop
4
Outer edge of the hob
5
Outer side of the seal
6
Bottom of the hob
2.
Insert the hob into the installation opening and push it downward carefully until
the hob is in firm contact to the worktop.
3.
Fix the hob at the bottom of the worktop using the fixing brackets (s. below).