34
Changing of the hinge position
WARNING!
Unplug the appliance before you change the hinge
position. Empty the appliance.
Carry out the change with at least 2 persons.
1.
Tilt the appliance slightly backwards and block it in this position so the door
cannot slip out.
2.
Unscrew the top stop-plate and the subjacent hinge.
3.
Remove the door carefully. Place it on a padded ground to avoid possible
scratches.
4.
Unscrew the lower hinge and install it on the opposite side.
5.
Put the appliance in a vertical position again. Place the door on the lower hinge
pin and adjust the door to its proper position.
6.
Fix the top hinge on the opposite sight. Fix the stop-plate with the screws.
Adjust the door properly. The seals must close properly.