24
of experience and knowledge if they are supervised or have been instructed
concerning the safe use of the appliance and do comprehend the hazards
involved.
Children
must not play with the appliance. Cleaning and
user-
maintenance
must not be carried out by
children
unless they are supervised.
Transport and handling
1.
If you move the appliance, hold it at its base and lift it up carefully. Hold the
appliance in an upright position.
2.
Do not tilt the appliance more than 45
0
.
3.
Never use the doors to move the appliance. This will damage the hinges.
4.
The appliance must be transported by at least
two persons
.
5.
If the appliance is transported in a horizontal position, some oil may flow
from the compressor into the refrigerant circuit.
6.
Leave the appliance in an upright position for
4-6 hours
before you switch it
on to ensure, that the oil has flowed back into the compressor.
7.
The supply cord must not be caught under the appliance while or after moving
it.
Refrigerant circuit
1.
Do not damage the refrigerant circuit. The appliance uses the environmental-
friendly refrigerant R600a. The refrigerant R600a is flammable !!! Therefore
the cooling circuit must not be damaged in any way
neither by transport
nor use.
2.
If any part of the cooling circuit is damaged, the appliance must not stand
near a fire, naked light or spark-generating devices. Contact the shop you
purchased the appliance at immediately .
3.
If gas is set free in your home:
Open all windows.
Do not
unplug the appliance and
do not
use the control panel or
thermostat.
Do not
touch the appliance until all the gas has gone.
Otherwise sparks can be generated which will ignite the gas.
4.
Keep all components of the appliance away from fire and other sources of
ignition when you dispose of or decommission the appliance.
