53
NOTICE!
Adjust the doors properly before you finally tighten the screws
of the hinges. The seals must close properly.
NOTICE!
Do not tilt the appliance more than 45
0
.
P
REPARATORY MEASURES
:
Empty the appliance.
Remove all drawers from the freezer (s. chapter 4.4.1 F
REEZER DRAWERS
) so
that they cannot be damaged.
It is necessary to tilt the appliance backwards while removing the door. You
should rest the appliance on something solid so it will not slip while changing
the hinge positions.
Do not lay the appliance flat as this can damage the cooling system.
All parts removed must be saved for proper reinstallation of the doors.
Always remove the doors carefully. Keep the door in a safe place so that it
cannot be damaged.
T
OOLS REQUIRED
:
Cross-head screwdriver
Flat bladed screwdriver
Socket spanner 8 mm
C
HANGE OF THE HINGE POSITION
:
1.
Unscrew both screws (2) on the back of the top cover (1) and remove them (s.
fig below).
Remove the top cover (1) and keep it in a safe place so that it cannot be
damaged.
1
T
OP COVER
OF THE APPLIANCE
2
S
CREWS ON THE BACK OF THE TOP COVER