58
16. Never use cleaning sprays to clean the door as they can damage
the lock and electric components.
17. The appliance is intended for washing max. 6 place settings.
18. Clean the appliance
regularly
(s. chapter C
LEANING AND
MAINTENANCE
).
19. The rating plate
must not
be removed or made illegible,
otherwise
all terms of the warranty become invalid!
SAVE THESE INSTRUCTIONS.
The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
2.1 Unpacking and Positioning
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1.
Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2.
The spray arms may be equipped with a transport protection. Remove
the transport protection before installing the appliance.
3.
Install the appliance in a dry and well-ventilated place.
4.
Always install the appliance near of a water supply line, a water drain device and
a safety plug.
5.
Install the appliance on a level, dry and solid surface. Check the correct
installation with a bubble level.
6.
The back of the appliance must face the wall. The sides must be aligned to the
adjacent pieces of furniture and/or walls.
7.
Connect the appliance to the mains and water supply properly.
8.
The nameplate is inside the appliance or at the back.
