66
The voltage and the frequency of the power supply must meet the data on the
rating plate.
If any malfunction occurs, the grounding will reduce the risk of electric shock as
the electrical flow will prefer the way of 'least resistance.
The appliance must be properly grounded before initial operation. If you are in
doubt that the appliance is grounded properly, a qualified professional should
check the status of the electrical installation (not covered by the guarantee).
2.6 Water supply
The water pressure must be between 0.04 and 1 MPa.
Ask the customer service if the water pressure has different values.
2.6.1 Safety supply hose
The safety supply hose is a double-walled hose. The safety system blocks the flow
of water if the supply hose breaks and water flows into the space between the
supply hose and the outer corrugated hose.
2.6.2 Cold water supply
Connect the cold water hose to a 3/4 inches thread. When the hoses are new or
were not used for an extended period of time, let the water flow until it is clear of
any contamination. Otherwise the water inlet will be blocked and the appliance
damaged.
H
OW TO CONNECT THE WATER SUPPLY HOSE
:
1
Pull the complete hose out of its storage compartment
at the back of the appliance.
2
Fix the hose with the 3/4 inches thread on the tap.
3
Open the water supply completely before you operate
the appliance.
NOTICE!
A hose that attaches to a sink spray can burst if it is installed
on the same water line as the dishwasher. If your sink has one, it is
recommended that the hose be disconnected and the hole plugged.
