90
T
ABLEWARE IS NOT DRIED PROPERLY
.
1.
Improper use of the dish rack.
1.
Load the dish rack properly.
2.
Not enough rinse aid.
2.
Check the quantity of the rinse aid.
Refill if needed.
3.
Tableware has been removed from
the appliance too early.
3.
Wait at least 15 min., before you
remove the tableware.
4.
Cutlery and tableware is made of low
quality materials.
4.
Do not clean such items using the
appliance.
S
OME DETERGENT IS LEFT IN THE CONTAINER
.
1.
Dishes block the container of the
detergent
1.
Place the dishes properly.
S
TEAM
.
1.
Normal.
1.
There is some steam coming through
the vent near the door latch during
drying and water draining.
B
LACK OR GREY SPOTS OR RUST SPOTS ARE ON THE TABLEWARE
.
1.
Aluminium-made objects touched
the dishes.
1.
Clean the marks with a mild abrasive
cleaner by hand.
2.
The items are not corrosion-
resistant.
2.
Do not clean such items using the
appliance.
3.
The lid of the water softener
container is not close properly.
3.
Close the lid properly.
4.
You have not started a programme
after you added the water softener.
The remaining salt is now affecting
the running programme.
4.
Always start the rapid programme
without adding any tableware when
you have added some water softener.
W
ATER REMAINS ON THE BOTTOM OF THE APPLIANCE
.
1.
Normal.
1.
A small amount of clean water
around the outlet keeps the water
seal functioning.
T
HE
A
PPLIANCE LEAKS
.
1.
Overfilled rinse aid container /
spilled rinse aid.
1.
Wipe up the rinse aid.
2.
The appliance is not levelled.
2.
Level the appliance.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the customer service.
