73
CAUTION!
When a rinse cycle has been completed, wait at least 20
minutes before cleaning the interior of the appliance so the heating
elements can cool down.
4.2 Water softener (dishwasher salt)
(Fig. similar: Fig. serves as an example only)
Only use a water softener (= dishwasher salt) which is suitable for
dishwashers. Other water softeners and salts, especially table salt, will damage
the water softener container.
Fill the container only shortly before you start a programme, otherwise spilled
residuals of the water softener may remain in the appliance and cause corrosion.
1.
Remove the lower dish-rack and the lid of the water softener container.
2.
When you fill the container for the first time, pour approx. 1 l water into the
container.
3.
Put the equipped funnel
10
in the opening and pour approx. 1 kg water softener
(=dishwasher salt) in the container.
4.
Close the lid in clockwise direction carefully. The lid must be closed properly.
5.
The control light for the hardness of water usually goes off after 2 - 6 days.
6.
Start a programme as soon as you have filled the container (rapid programme);
otherwise the filter system, pump or other important components of the
appliance may be damaged. Failure to do so will void the guarantee.
NOTICE!
Start a programme as soon as you have filled the container
(rapid programme); otherwise the filter system, pump or other important
components of the appliance may be damaged. Failure to do so will void
the guarantee.
10
Depending on model