53
3.
Connect the water supply hose to the cold water supply ( see chapter
COLD
WATER CONNECTION
).
4.
Connect the water drain hose (see chapter
CONNECTION OF THE DRAIN HOSE
).
5.
Connect the power cord. (see chapter
POWER CONNECTION
).
6.
Fix the condensation strip (F) under the work top (fig. 3). The condensation
strip should fit flush to the edge of the worktop.
7.
Place the appliance into position (Abb. 4)
8.
Level the appliance. The back feet can be adjusted from the front by rotating
the screw in the centre of the housing; use an Allen key (fig. 5/A). Use a flat
screwdriver to adjust the front feet (fig 5/B).
9.
The appliance must be secured in place. There are two ways to do this:
a.
Wooden worktop: Fix it on the worktop using the wood screws. Please check,
that the door does not touch the worktop when being opened (fig. 6).
b.
Worktops made of marble or granite: Install the bracket on the side of the
appliance. Fix the appliance on the kitchen furniture. Cover the screw using the
rubber cap (fig. 7)
