46
and energy-leading components must be replaced by an authorized
professional. Do not use a socket board or a multi socket when
connecting the appliance to the mains.
11. Do not connect the appliance to an energy saving plug (e.g. Sava
Plug) and to inverters which convert direct current (DC) into
alternating current (AC), e.g. solar systems, power supply of ships.
12. A dedicated and properly grounded socket meeting the data of the
plug is required to minimize any kind of hazard. The appliance must
be grounded properly.
13. The plug and the socket must always be accessible after installation.
14. Check that the power cord is not placed under the appliance or
damaged when moving the appliance.
15. Remove possible dust accumulation at the power plug, at the safety
power socket and at all plug connectors
regularly
. RISK OF FIRE!
16. Keep the cord away from heated surfaces.
17. Do not use any extension cords, multiple sockets or adapters. RISK
OF FIRE!
18. The technical data of your energy supplier must meet the data on
the model plate of the appliance.
19.
Your domestic circuit must be equipped with an automatic circuit
breaker.
20. Do not modify the appliance.
21. Turn off the power before you install the appliance and before you
connect it to the mains. RISK OF ELECTRIC SHOCK!
22. Disconnect the appliance from the mains before you clean or
maintain it. RISK OF ELECTRIC SHOCK!
23.
Do not use any electric appliances inside the food storage
compartments of your appliance unless they are recommended by
the manufacturer of your refrigerator.
24.
Do not put any heat-radiating appliances onto your appliance.
25. Do not install the appliance in a place where it may come in contact
with water/rain; otherwise the insulation of the electrical system will
be damaged.
26.
Do not put a water-boiler or vases onto your appliance. The electrical
components of your appliance can be seriously damaged by water
over-boiling or spilled water.
27. Do not use any steam cleaners to clean or defrost the appliance. The
steam can get into contact with the electrical parts and cause an
electrical short. RISK OF ELECTRIC SHOCK!